Type AW Alphawedge
The Alphawedge is designed for Ribdeck E60 manufactured by Hare Decking, formerly Richard Lees Steel Decking.
Type BR Rail Clip
Versatile clamp for steel beams or rail (low speed applications only). The skirt prevents the clamp rotating during installation. The BR tail spans slotted holes. Suitable for flanges up to 8°.
A two part flange clamp with large clamping range. The bolt can be substituted with either drop rod or J bolts. For parallel flanges only.
Beam flange clamp with swivel unit. For parallel and sloping flanges. Supplied with grade 8.8 setscrew for secure grip.
The purlin clip HCW30 is suitable for horizontal purlins. Can be used with type SW-Swivel Unit for use on inclined purlins
Type HW / HC
For vertical suspension on angled surface of up to 10° swing either side of the vertical. The hemispherical washer (HW) can be used without the cup. Loads are subject to applications, please contact Lindapter.
Beam clamp with M6 or M8 tapped holes in the back face and lower jaw to accept threaded rod or cable clips. For parallel or tapered flanges. Supplied with grade 8.8 cup point setscrew.
The Type MF is designed for MetFloor® 60 & Metfloor 80 profiles manufactured by Composite Metal Flooring (CMF®)
Type MW2 Multiwedge 2
The Multiwedge 2 is designed for Multideck 60 and Multideck 80 profiles manufactured by Kingspan Structural Products.
Type RC Drop Forged Clamp
Special clamp for steel beams of 10mm or greater. Packings are available for thicker flanges. The RC tail spans slotted holes. Suitable for flanges up to 5°. The product will be drilled to suit hole size and position requirements of the applications.
Type SD2 Slimdek 2
The Slimdek 2 is designed for the ComFloor 225 profile manufactured by Tata Steel Europe. It gives a fully flexible suspension position.
A strap hanger with LPCB and FM approval for use in fire sprinkler installations. Supplied with or without a hanger nut. Can be used with all Lindapter flange clamps.
Swivel unit for applications on inclined beams. Can be used with various fixings (see related components) and allows the drop rod / setscrew to hang vertically.